Wheeleez 30cm Beach Wheel are for the full size cart.
The wheel is 11.8 x 7″ and these are the 1″ axle hub. For 1/2″ and 3/4, please call us.
They weigh 3 pounds each.
These are the 1″ hub wheels that we use on our Mullet Miller CTug Carts.
Wheeleez® Wheels disperse loads over large surface area
Wheeleez® Wheels don’t get stuck, rutted or bogged down
Wheeleez® Wheels have special pliability permitting easy rolling over:
Use on hand-drawn carts or heavy, portable equipment like wheel barrows,
pumps, generators or hand trucks
The price is for one Wheeleez 30cm Beach Wheel only.
|1.||Does your tire have a “shrader valve?” This is the kind of valve you would find on a bicycle tire or car tire.|
|2.||Inflate tire and submerge in soapy water to detect leak. (If it’s not obvious.)
|3.||Mark puncture by inserting nail/pin.|
|4.||Deflate tire completely.|
|6.||Your wheel is easily repairable using a hot knife or soldering iron.
(A knife heated with a lighter will work if you don’t have access to a hot knife or soldering iron.)
|7.||For pinholes and punctures you can melt the surface material immediately surrounding the hole and cover the hole with the melted material. Be sure to only melt the surface material. Don’t melt too deep.|
|8.||For tears, pinch area around the hole or cut to expose inner edge of tire wall. Apply heated tip of soldering iron or hot knife to tire wall until material gets sticky.|
|9.||Gradually release grip on tire and allow the material to come back together.|
|10.||Apply iron/knife to edge of the outer edge of hole/cut and build up tire material on top of that area.|
|11.||Let patch cool and cure for 10-15 mnutes. Inflate to specified pressure. (2 to 2-1/2 psi.) For best result use a bicycle pump. DO NOT OVERINFLATE. Use low pressure gauge to check pressure.
(Normal automotive tire pressure gauges can not accurately measure the low pressure in Wheeleez® wheels.)